6kg Industrial Humidifier Ultrasonic Sprayer Workshop Moisturize Dedusting 110V

Description

Ultrasonic Industrial Humidifier Sprayer 6kg/h
Upgrade model, you can put on a bucket directly.
1. Ensure atomized humidifying effects, cleaning the inner machine regular, one time one month, cleaning method as follows:
A. Open cover, using soft cloth or brush cleaning atomization device (Do not scratch atomization device as well as water level induction switch, the home detergent can not be used), cleaning the scale, then washing by clean water;
B. While watering, do not pour the water into the circuit board to lead to short circuit.
C. Close cover
2. Ensure machine runs normally long time, water filter should be regularly cleaned, one time one month, cleaning method is as follows:
A. Open the cover of filter;
B. Removing dirt from filter;
C. Close it again.
Parameters :
1 .Fog volume: ≥
6KG/
H
2. Humidity: 1%-99%
3. Power supply: AC
110V
4. Power:
650W
5. N.W.:
50.7lbs
6. Control method: humidity control
7. Applicable space:
40-100m
²
(400-1000sq.ft)
8.
Hole:
4.3inch
（110mm）*
1
9. Water supply quality: purified water, tap water (softened)
10. Material: Stainless Steel
11. Air Volume: 160m³/h
12. 69*32*40cm (27.16"*12.6"15.75")
Working principle:
The
high frequency vibration of atomizing film will throw the water out of the surface and shape the natural and flying water fog, produce water particle of 1-10μand float in the air without heating or adding chemical, so as to achieve humidification. The appropriate relative humidity will have the decisive function in the improvement of product quality, reducing of scrap rate, anti-static, eliminating dust, air purification and environment improvement etc.
NOTICE:
Bucket and chimney tube are not included!
Item included(191105):
1*
Ultrasonic industrial humidifier cooler sprayer
1
*
Hose
2*Key
4*Wheels
On Sep-24-20 at 02:17:42 PDT, seller added the following information: